How to fill the wall-hung boiler with water
Wall-hung boilers are common heating equipment in modern homes, and their correct water filling operation is a key step to ensure safe operation. This article will combine the hot topics and hot content on the Internet in the past 10 days to introduce you in detail the specific methods of filling the wall-mounted boiler with water, and attach relevant data for reference.
1. Preparations before filling the wall-hung boiler with water
1. Check the boiler status: Make sure the power is off and the system is cooling.
2. Prepare tools: bucket, hose, wrench, etc.
3. Confirm water quality: It is recommended to use softened water to avoid scale accumulation.
| Preparing work projects | Specific requirements |
|---|---|
| power status | Must be completely powered off |
| System temperature | Below 40℃ |
| Water quality requirements | PH value 6.5-8.5 |
| water pressure standard | 1-1.5Bar |
2. Detailed explanation of the steps for filling the wall-hung boiler with water
1. Locate the water filling valve: usually located at the bottom of the boiler.
2. Connect the hose: Connect one end of the hose to the water injection valve and the other end to the water source.
3. Fill water slowly: observe the pressure gauge and control it between 1-1.5Bar.
4. Exhaust operation: Open the exhaust valve of each radiator to exhaust the air.
5. Check the sealing: confirm there is no leakage.
| Operation steps | Things to note |
|---|---|
| Water injection valve positioning | Reference manual illustration |
| Water injection speed | No more than 0.5L/minute |
| pressure control | No more than 2Bar |
| exhaust time | About 30 seconds per exhaust valve |
3. Frequently Asked Questions
1.Why doesn't the pressure gauge rise?
There may be a leak in the system or incomplete exhaust.
2.What should I do if the pressure drops quickly after water injection?
Check the tightness of the pipeline and contact professionals if necessary.
3.Can I use tap water to fill the water directly?
It is okay for the short term, but it is recommended to use softened water to extend the life of the equipment.
| Question type | frequency of occurrence | solution |
|---|---|---|
| abnormal pressure | 35% | Check exhaust/sealing |
| water leakage | 25% | Fasten interface/replace gasket |
| water quality issues | 20% | Install water softener |
| Operation error | 20% | Read the instructions carefully |
4. Safety precautions
1. It is strictly prohibited to perform water filling operations while the power is on.
2. Pay attention to antifreeze in winter and ensure the normal operation of the system after filling the water.
3. In case of abnormality, stop operation immediately and contact after-sales service.
4. It is recommended to conduct system inspection before the heating season every year.
5. References to recent hot topics
According to network-wide data monitoring, recent hot discussions about wall-hung boilers are mainly focused on:
- Energy-saving and environmentally friendly wall-hung boiler purchasing guide
- Intelligent wall-hung boiler remote control technology
- Compatibility issues between wall-hung boilers and floor heating systems
- Application of new anti-freeze protection technology
Through the above structured instructions, I believe you have mastered the correct method of filling the wall-mounted boiler with water. If you still have questions, it is recommended to consult professional installers or manufacturer customer service. Correct operation not only ensures heating effect, but also extends the service life of the equipment.
check the details
check the details
en
